Cat hammock and double shelf
Give your cat the ultimate in luxury with the Cat hammock and double shelf. They can watch the world around them from the safety of a high, above the ground perch, and can relax and snooze away the afternoon in the comfy hammock.
Both shelves feature a soft and cosy carpet surface.
The canvas will be taught to start, but may stretch over time with use.
Size: shelves 470mm long x 340mm wide x 40mm high each, hammock custom length up to 400mm wide (including brackets)
Our Cat hammock will fit seamlessly into the design of your home. The cat hammock and carpet are each available in one of three different colour options. Plus, choose the timber colour from a range of four wood finishes, or keep it natural. We use Osmo Polyx-oil to help protect the timber over it's life, it is water and stain resistant and extremely durable.
The hammock can be custom made in length to fit purrfectly between where you mount your shelves onto the wall. Please advise the length required for your space in the notes section, at the checkout.
Product is shown in clear timber finish, silver carpet and silver canvas.
Mounting your Cat hammock and double shelf
When choosing a location for your wall mounted furniture, consider somewhere with a view of the outdoors – a sunny afternoon spot works well. Place up high with a combination of cat shelves and scratcher shelves forming a set of steps or use at a height off the ground that is easy for your cat to jump on to.
We recommend mounting each piece of your cat furniture 300mm apart (vertically).
Our wall mounted cat products are available in two sizes and fit our bespoke wall brackets. These are available in 450mm wide to fit a 400mm stud centre or 650mm wide to fit a 600mm stud centre. It is important that you check which size suits your home, prior to purchasing. Here's how to locate the studs in your wall.
The Cat hammock and double shelf includes mounting brackets, wall fixing screws, screws to fix the cat shelf on to the mounting bracket and to fix the hammock to the shelves.
Tools required to install: 4mm drill bit, PH3 drill driver bit (or screwdriver and lots of elbow grease), PH2 drill driver bit or screwdriver, spirit level.
To ensure the safety of this Cat shelf, it is important that you mount to the wall and directly into the stud (not the nogs) using the 75mm screws provided and at a minimum of four points along the bracket. Note the four holes used do not need to be at each end, but should not be directly next to each other, to help spread the load.
Weight tested up to 30kg when installed correctly.
We aim to despatch all orders within 10 working days.
$274.00 – $289.00